![]() |
W210 door lock
Having problems opening the car via the key and the electronic door handle on my '97 E420. I have changed the batteries in the "key" and its seems to work fine pointed at the front windshield. I have notice that the door handle "window" for the lock and the trunk lock has gotten "faded" and I am thinking this may be the cause.
Has anyone repaired/replaced these before and if so has some sort of DIY fix that I can do? Maybe some 2000 grit wet sandpaper will bring back some of the clearness to the thing? Thanks in advance. |
Rubbing compound works better (white machine type)
|
I am having the same problem on my 97 e300d. All other locks work, but the driver door does not. I looked up the price for a new sensor($800).
I hope someone can help. |
Do you have to get a new IR receiver from Mercedes or can I get one off another car in the salvage yard?
It now has a hole in it.... |
The receiver does not have any "smarts" in it so swapping will be easy. Also have a look at a similar year C class, they have the same door handles from what I've seen. ( I'm not sure if other models are the same )
|
Bump.....does anyone have anymore input?
Went to a salvage yard but all they had were W210 320's and no IR receivers. What year were these receivers installed in the cars? I thought they are only '97 and '98 but am not sure. Do I have to buy one from the stealership at $500? Anyone have one out there? |
I know on the C280 W202, 97 was the first year for IR on the drivers door so I'd say the E320 W210 is the same ( and they deleted the mechanical lock)
Did you get an actual price from the dealer or are you one of those people whom use that term without any basis? |
Quote:
|
Ok, I found a IR door receiver. It looks like it has a screw/bolt on the inside for mounting, however I took the door panel off and don't see a way into the area I need without taking the door latch parts off.
Does anyone have a procedure for this? I have checked the search but don't find anything of value there. I need some educated help. |
I found the information, wow, it was easy.
Thanks everyone and keep up the good work on the forums. |
All times are GMT -4. The time now is 02:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website