|
|
|
#1
|
|||
|
|||
CAN Bus termination
Is the CAN bus terminating resistor in the harness/connector or inside the modules (ECU/BODY/DAS..) ? Or is it software controlled?
|
#2
|
|||
|
|||
What year & model car?
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
ML350 2006
|
#4
|
|||
|
|||
CAN spec says the termination should be at the ends of the network, so it should be in the CAN devices, not in the wires.
source: i work on ECUs for a living. Last edited by John5788; 04-09-2010 at 11:38 AM. |
Bookmarks |
|
|