|
|
|
#1
|
|||
|
|||
Help! Bad advice from MB indy
Hello, I have been getting some inaccurate advice from my local MB indy. My car 1993 300E 2.8, swapped a 3.2 with less miles from a '94 E320. My wiring harness was toast, I bought a harness (supposedly correct) from the indy. However it was not the correct one, the part number is 124 543 20 06, for sale now in classifieds. So, I bought another harness, used replacement from a different '94 E320 than the engine donor. Are there any compatability issues using the '94 3.2 harness with my '93 2.8 ECU? All of the connectors matched up and were the same. Any guidance is greatly appreciated, this site is where I will be getting repair advice from this point on.
|
#2
|
|||
|
|||
The 1993-94's with 2.8 & 3.2 engines use the same harness, MB # 124-440-56-32.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
MB Doc, great. Thanks. I am just trying to make sure I eliminate any issues as I try to get this car back on the road. I must way that I am a huge MB fan now.
|
Bookmarks |
|
|