PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   123 trans help needed! (http://www.peachparts.com/shopforum/tech-help/27688-123-trans-help-needed.html)

barndoor 12-07-2001 08:55 PM

123 trans help needed!
 
our '82 300TD wagen wont go forward!
reverse works fine.
I suspect from what I have learned from this website is that its the "B2 piston pump" ?
the car has about 160k
since the trans removal is about 9 hours labor plus about $100 for the pump,
should I just get a rebuilt trans at this point?
and if so,
where is THE place to get the trans?
I'm in oregon,
but ,distance is not so much of a problem,


barndoor

'85 380 SE
'82 300 TD
'64 220 S sunroof
'60 190b:

dpetryk 12-08-2001 04:54 AM

Let me throw my 2 cents worth in the hat. Im in the process of overhauling a tranny on my 87 420sel. I can only speak about that tranny. Not sure about yours but I suspect it is similar to mine.

First off, there is no such thing as a B2 piston pump. There is a B2 piston and there is an primary and auxillary oil pump. On my transmission the B2 piston and auxillary oil pump can be changed without removing the tranny. You might try that first. But I would think that a full overhaul is probably not far off.

Dont run the tranny untill you have a catostrophic problem since that usually destroys the hard parts which are very expensive to replace. The soft or friction parts slowly wear out and you dont want to wait until metal meets metal. No way to know for sure unless you do a full tear down of the tranny. I had a sudden and catostrophic failure on my 91 420sel at 170k. Prior to that day no problems. You are living on borrowed time. Do the right thing.

I have found that the dealer offers a factory rebuilt unit at a good price. If you have someone rebuild it, make sure that are an expert on MB trannys. Or if you feel adventurous, DIY. My hands smell like ATF as we speak. Join the club.

Let me know what you find out.


All times are GMT -4. The time now is 12:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website