Vacuum line routing for EZL 89 300SE

[benfield4]

All

Looking through documents and have a question. Anyone with an 89 300 SE with the M103 Engine. Can you tell me if the Vacuum line for the EZL module goes to the manifold or to the throttle valve under the Air sensor?

On mine the vacuum line for the EZL is coming from the Manifold and the smaller vacuum line from the Throttle valve goes to the Purge Canister valve. Note the large line from the Throttle valve also goes to the purge canister valve. The documents I am looking at show a vacuum line going from the throttle valve to the EZL. Seems reasonable that you don't want the EZL to have vacuum until you press on the pedal and open the throttle valve.

Thanks for any help you can give!