Cruise Amp On 300E
Hello,
I noticed a post on cruise control amplifier removal. I have an 87 300e and the amp is under the dash left of the steering. I’m going to have to remove the lower dash. Before I break something I was hopping someone could give me some pointers. How do you remove the headlight switch? How do you remove the black trim? I understand the amp is held by two screws to a bracket. The bracket is held by a 10 mm bolt. From under the dash I can put my hand on one screw on the passenger side on the bracket. Is the 10mm bolt on the passenger side of the bracket, center. or driver side of the amp? |
As far as the headlight switch goes, don't remove it! Pull off the headlight knob & then remove the nut for the switch. then you can remove the black trim.
|
Is there a release button for the HL switch knob?
|
No, just pull.
|
That was too easy
Thanks... I have the amp on my desk |
All times are GMT -4. The time now is 08:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website