Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-11-2010, 05:12 AM
tilac1's Avatar
Registered User
 
Join Date: Jun 2004
Posts: 212
Modifying Power Steering Pump Valve

To get more boost as the steering is quite heavy around town either by shimming or increasing the valve orifice size. I'm thinking of giving it a try.

Reply With Quote
  #2  
Old 06-11-2010, 05:24 AM
Stretch's Avatar
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
What car / pump are you talking about?

For example if you have a 65 bar pump on a W123 people commonly interchange with the higher pressure pump from a W126...
Reply With Quote
  #3  
Old 06-12-2010, 05:40 AM
tilac1's Avatar
Registered User
 
Join Date: Jun 2004
Posts: 212
1988 300E M103 W124. Is there a W126 pump I can swap into it or just change the valve?
Reply With Quote
  #4  
Old 06-12-2010, 08:35 AM
Stretch's Avatar
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Not sure

Quote:
Originally Posted by tilac1 View Post
1988 300E M103 W124. Is there a W126 pump I can swap into it or just change the valve?
Sorry I don't know the answer to that one - but the W126 pump is rated at 82 bar (I think). People have reported here that swapping from one pump to the other makes little difference.

I'm not sure you're going to get the desired effect by changing the pressure of the pump - may be may be not - I assume you've done the obvious and checked to make sure all of the steering joints are working as they should?
Reply With Quote
  #5  
Old 06-12-2010, 10:43 AM
tilac1's Avatar
Registered User
 
Join Date: Jun 2004
Posts: 212
Yes, all is in very good condition, 60K miles on the car. Just need more assist for the power steering around town. I may pull out the pressure valve and try to modify it.
Reply With Quote
  #6  
Old 06-13-2010, 09:38 AM
Stretch's Avatar
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Good luck - I just had a thought though - tire pressures OK? However, if it really is a problem with the 'design' then I'd get a good second hand unit before starting any modifications on the existing one. Just in case...
Reply With Quote
  #7  
Old 06-13-2010, 09:56 AM
tilac1's Avatar
Registered User
 
Join Date: Jun 2004
Posts: 212
Ya, good idea. I'll play with an old one first.
Reply With Quote
  #8  
Old 06-21-2010, 06:53 AM
dpetryk's Avatar
Electrons can do anything
 
Join Date: Sep 2001
Location: Houston, Texas
Posts: 1,072
I think the pressure increase will not change the feel of the steering. You need to investigate making changes in the steering box. Specifically the mechanism that opens the hydraulic valves in the steering box. There are some springs that if they are made to be weaker will allow the valve to operate with less effort from the steering wheel.

My 300E steering is so powerful that you can steer it in a parking lot with nothing more than your little finger.
__________________
I got too many cars!! Insurance eats me alive. Dave

78 Corvette Stingray - 3k
82 242 Turbo Volvo - Manual - 270k
86 300e 5 speed manual - 210k
87 420sel - 240k
89 560sl - 78k
91 420sel - 205k
91 560sel - 85k
94 GMC Suburban - 90k
97 Harley Davidson Heritage Softail - 25k
00 GMC Silverado 1 ton 30k
Reply With Quote
  #9  
Old 06-21-2010, 04:32 PM
Registered User
 
Join Date: Jul 2008
Posts: 1,236
I like my steering stiff. Keeps things manageable at speed.
__________________
-tp


1990 300SE "Corinne"- 145k daily driver - street modified differential - PARTING OUT OR SELLING SOON - PORTLAND OR. AREA - PM ME FOR DETAILS
1988 560SEL "Gunther"- 190K passes anything except a gas station
1997 S420 - 265k just bought it with a rebuilt trans. Lovely condition
Reply With Quote
  #10  
Old 06-21-2010, 06:39 PM
babymog's Avatar
Loose Cannon - No Balls
 
Join Date: Jan 2006
Location: Northeast Indiana
Posts: 10,765
Umm, variable assist.
__________________

Gone to the dark side

- Jeff
Reply With Quote
  #11  
Old 06-21-2010, 06:46 PM
tilac1's Avatar
Registered User
 
Join Date: Jun 2004
Posts: 212
Quote:
Originally Posted by babymog View Post
Umm, variable assist.
Exactly. Mine isn't very powerful at low speeds. Definitely not 'turn with a finger in the parking lot.' No complaints on highway but it seldom sees it.
Reply With Quote
  #12  
Old 06-21-2010, 08:06 PM
babymog's Avatar
Loose Cannon - No Balls
 
Join Date: Jan 2006
Location: Northeast Indiana
Posts: 10,765
Whatever is different between your early years car, and the later years cars, makes my '94 and '95 E320s steer very easily at parking-lot speeds.

I'd like to know which part is different also, as I'd make the change to my '87.
__________________

Gone to the dark side

- Jeff
Reply With Quote
  #13  
Old 06-22-2010, 05:18 AM
tilac1's Avatar
Registered User
 
Join Date: Jun 2004
Posts: 212
Quote:
Originally Posted by babymog View Post
Whatever is different between your early years car, and the later years cars, makes my '94 and '95 E320s steer very easily at parking-lot speeds.

I'd like to know which part is different also, as I'd make the change to my '87.
So your '87 is significantly less power assisted? I checked later pumps (94-95)on ebay and they are 110 bar, same as my '88 pump. Something must be different but I can find no mention of it.
Reply With Quote
  #14  
Old 06-22-2010, 08:25 AM
dpetryk's Avatar
Electrons can do anything
 
Join Date: Sep 2001
Location: Houston, Texas
Posts: 1,072
I respect Larry's opinion, but I must say that my 300e is nice when in the parking lot. Of course it gets really easy on the high way and you have to be careful. I don't have a strength issue but I would not mind a little more power steering in my bigger cars while going slow. I guess that is why they invented variable ratio and all the other improvements.
__________________
I got too many cars!! Insurance eats me alive. Dave

78 Corvette Stingray - 3k
82 242 Turbo Volvo - Manual - 270k
86 300e 5 speed manual - 210k
87 420sel - 240k
89 560sl - 78k
91 420sel - 205k
91 560sel - 85k
94 GMC Suburban - 90k
97 Harley Davidson Heritage Softail - 25k
00 GMC Silverado 1 ton 30k
Reply With Quote
  #15  
Old 06-22-2010, 09:16 AM
babymog's Avatar
Loose Cannon - No Balls
 
Join Date: Jan 2006
Location: Northeast Indiana
Posts: 10,765
No disrespect to Larry's opinion either, but it's not about strength anymore than power brakes are about strength. Provided the system has a good balance between assist at low speeds and feel at higher speeds, I prefer the greater assist of my '95. It has great feel, but doesn't fight me like a 123 around low-speed corners. The parking-lot manuevers aren't really the issue, it's just so un-refined feeling going around slow corners to have it pulling a few pounds of force to hold the wheel into a low-speed turn where my '94/'95 cars are a two-finger job at low speeds.

I'm pretty sure that Mercedes spent the money to re-design and re-tool the later 124 for a reason, and since the components aren't any less expensive in this case, it couldn't have been motivated by cost.

So for those of us who prefer the lighter feel at low speeds, not interested in whether we need more arm strength or whether the high-speed feel is inadequate, I can tell you that I'm quite happy with the feel of the late-model 124s at 110mph-135mph, the feel on circuit tracks and on the highway. The early 124 is simply too heavy feeling and tries too hard to re-center.

Now back to the original poster's subject.

I question whether the difference between the early and later cars is more geometry than boost? Could easily be the steering box has lower pressure actuating valves, but could it also be a reduction in caster? I know that the control arms are different part numbers, what else has changed?

__________________

Gone to the dark side

- Jeff
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page