|
|
|
#1
|
|||
|
|||
Will replacing the transmission mount do anything?
I have a new transmission mount that I was going to replace with the engine mounts.
I replaced the engine mounts, and the idle is very smooth now, however throughout the revrange there are some very small vibrations/harshness. I check the transmission mount (I didn't replace it) and it still feels very rubbery and decent. Would swapping it to a new one give any difference? Or is my vibration/harshness coming from another place? Thanks
__________________
Smoke Silver 1994 E220 Coupe Automatic 0 kilometers 6 September 1994 100,635 kilometers - 6 September 2010 |
#2
|
|||
|
|||
It's not just how rubbery it feels.
It's the height of the mounting hole to the transmission vs the crossmember mounting height. They drup with age and use. I replaced mine and it's probably 1/2 inch higher now. Michael |
#3
|
|||
|
|||
Did you notice any difference when driving?
__________________
Smoke Silver 1994 E220 Coupe Automatic 0 kilometers 6 September 1994 100,635 kilometers - 6 September 2010 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|