|
|
|
#1
|
||||
|
||||
AC Kompressor Change
I'm going to be replacing my York compressor with a Sanden in the Spring and will continue to use R12. I'll exchange the receiver/dryer and expansion valve for stock. One of the hoses may have to be a foot longer. My question is, will the refrigerant capacity remain the same? (All AC capacities seem to be measured in lbs and not psi).
__________________
__________________
Don't Chrome them; polish them |
#2
|
|||
|
|||
While the compressor may be slightly different, I wouldn't sweat it. If you are charging with R12 then you can use the sight glass in the receiver drier. When you no longer see bubbles without the aux fan running, then it is full.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|