PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Open foglight assembly (http://www.peachparts.com/shopforum/tech-help/28027-open-foglight-assembly.html)

sdjumin 12-14-2001 05:35 PM

How to open foglight assembly?
 
Hi,

I need to replace my foglight bulb of my 1998 E-320. I am able to open the small hinge door under the bumper. However, I couldn't detach or open the back of the foglight assembly in order to replace the bulb. Would anyone give me a direction on how to do so? I will really appreciate it very much. Thank you.

pat201 12-18-2001 08:08 PM

The back of the fog lamp assembly is held in place by a torsional snap fit. To release it you should press on the lower beam which rotates and opens access to the back of the bulb.

The door in the lower panel is made in a cheap plastic (polypropylene which sells for about $0.30 per pound). When you rotate the knobs to open and close the door use a quarter and not a screw driver which may damage the knob.

Good luck.


All times are GMT -4. The time now is 08:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website