![]() |
190E Caliper pin bellows - available?
Hello, does anyone have suggestions for obtaining just the rubber boots/bellows that protect the front brake caliper pins? The 190E has Girling calipers. I read one post that the dealers sell caliper pin kits for $30/pin. There has to be a cheaper way. Other than the bellows being deteriorated, the brakes work fine. For now I cleaned and relubed the old pins, and reused the old bellows.
Thanks, Brian 1986 190E 2.3 8v |
MB number 001-420-13-83 shows a suggested list of $22@.
|
According to "a German supplier" ATE make this part number and that it costs about 12 euros - but I'm not sure if they'll fit your Girlings - may be the good people who sponsor this web site can help?
|
Thanks MB DOC! I am saving that number. Looks like I'd need 2 of them to do it. Comes with pins and boots, apparently. I wish I could just get the boots for under 10 bucks though...
|
All times are GMT -4. The time now is 04:55 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website