As the heading says, I'm curious if a 722.6's internals could be put into the body of a 722.5, or if the 722.6 could be made to work on the vacuum and cable controls of the 722.5. As in delete the electronic controls and replace with manual...
Just thinking here late at night...

__________________
All it takes for evil to prevail is for good men to stand by and do nothing.

Too many people tip toe through life, never attempting or doing anything great, hoping to make it safely to death... Bob Proctor

'95 S320 LWB
'87 300SDL
'04 E500 wagon 4matic

Um, no.

Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

Ditto! not even.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Maybe you can use a 722.6 + the gearbox ECU

__________________
Smoke Silver 1994 E220 Coupe Automatic
0 kilometers 6 September 1994
100,635 kilometers - 6 September 2010

just a question------how will the solenoids that change gears be activated by a cable?

__________________
David S Poole
European Performance
Dallas, TX
4696880422

"Fortune favors the prepared mind"
1987 Mercedes Benz 420SEL
1988 Mercedes Benz 300TE (With new evaporator)
2000 Mercedes Benz C280
http://www.w108.org/gallery/albums/A...1159.thumb.jpg