|
|
|
#1
|
|||
|
|||
torque specs on head bolts
only thing i ve not seen is , what are the torque specs. for the inline 6 head bolts in my 90 300 e, and the torque order? any help please.
|
#2
|
|||
|
|||
still new here??how 2 id. your engine
i ve got a 90 300 e with about 167.000. its a inline 6 in it. would it be the i guess the 3 liter, or the 2.6 liter?? i still need the torque specs. and torque pattern too. i got this car for 500 in traded work from my lawn service. i do like it , the seats and inside r nice. just needs a paint job. it was hard to get started as it sat 5 years. in this ladies driveway. but then after driving for about 2 or 3 months the head gasket went. that other site is great for pulling the head, but never saw torque specs. thanks for any help
|
#3
|
|||
|
|||
Torque in 3 stages, starting in the middle & work out in both directions.
Make sure the bolts aren't stretched too much OR use new bolts. oil the threads & contact washer. 1) 70Nm (about 48 ft lbs) 2) 90 deg angle rotation 3) 90 deg angle rotation
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#4
|
|||
|
|||
M103.98_series engine
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#5
|
||||
|
||||
The Reinz headgasket set which I bought had the torque pattern and torque values described on an instruction sheet. I cross referenced them with an online 124 mercedes repair site and a repair manual and they were correct.
|
#6
|
|||
|
|||
thank you so much . i just want to be running again, now i got all this goo in my water passages like coffee with cream. i guess im going to keep flushing my cooling system. andrew nunn n jax fla. 90 300 e i got 4 500 bucks.
|
Bookmarks |
|
|