|
|
|
#1
|
||||
|
||||
Vacuum 1991 190E fresh air vent
I changed out the pod for fresh air system, i had to remove three lines green/wht gr/yl and gr/bl I failed to take pics now I have trouble. first I was getting a/c and heat at the same time, re open the system found one vacuum line fell off, fixed that, but when i push the heater button i get a/c. I have slight heat if i do not push the button in, I also get very little movement from the vent flapper. I am not sure of the hose conection to the pods. not sure of the vacuum juntion block eather, that is as to its working condition. yet I tend to think it is ok because untill the pod rubber failed every thing worked fine. Any one who can shed some light please do, thanks.
|
#2
|
||||
|
||||
Here are the vent Pod Diagrams I used for my '91 300E. Not sure if they are the same but likely.
Steve |
#3
|
||||
|
||||
vacuum pods
thank you for the pics they are not the same as mine I have two that I can find, but the seven port control valve is the same, I may have to tare down the uper dash to see all of the controlls. the color is not the same as mine eather. but I saved your to file may come in handy one day. thanks again for your responce.
|
#4
|
||||
|
||||
|
Bookmarks |
|
|