PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Tornado fuel saver (http://www.peachparts.com/shopforum/tech-help/28744-tornado-fuel-saver.html)

pmizell 12-29-2001 11:12 AM

Tornado fuel saver
 
Saw an infomercial on this product late the other night and was wondering if anyone had tried it. It goes inside your air filter element and purportedly creates an air swirl that makes for a better fuel/air mixture, increasing mileage and performance.

Of course I'd never buy one unless someone confirmed that it is actually effective.

I'm curious to know.

:eek: :eek: :eek:

http://www.tornadofuelsaver.com/info

~Paul

loubapache 12-29-2001 11:52 AM

If it does half what it claims, all auto manufactures will be using it already.

Plus they list the 300 SDL as DSL. LOL, very fast Internet connection.

420SEL 12-29-2001 03:37 PM

I have seen this too. I think it might have the same effect as Donald's ram air modifications at high speed. Why don't you try it out and let us know?

TurboTurbine 12-29-2001 06:36 PM

i know that many engines at least diesels already have some thing called a turbulance chamber where in the fuel air mixture is blown into a shaped chamber and the fuel and air are thorouhgly mixed then ignited. i am not sure how and additive can do this though!

420SEL 12-29-2001 06:55 PM

This product isn't an additive like a fuel additive, it is a piece of metal shaped almost like an airplane propeller that you insert in the air intake tube. It is supposed to spin the air as it enters, speeding it up and reducing turbulance making for smoother air delivery with higher volume and force. I haven't tried it, but it looks interesting.

Clauser1 12-29-2001 07:37 PM

Turbo wannabe?

TurboTurbine 12-29-2001 08:03 PM

sounds a lot like a turbine but without the force of a turbine.if it is not powered then it will just windmill around in the intake. oh well maybe it works!

fredsegal 01-02-2002 12:13 AM

there are not even any moving parts on this contraption. I remember these were sold in autoparts stores about 10years ago under another name. I'm still waiting for someone I know and respect to endorse them, until then I'll keep my $50+

Neil Eglintine 01-02-2002 05:09 AM

Snake oil works better!

LarryBible 01-02-2002 06:59 AM

This just goes to show you that Snake Oil is not always in liquid form.

Have a great day,

Kuan 01-02-2002 08:15 AM

Another way to look at this thing is that as air flows into the intake it runs into a weird looking obstacle it has to get by. The air pushes one blade aside to pass but instead of having free passage it's confronted with yet another blade. Repeat this 100,000 times a minute... :)

Kuan

LarryBible 01-02-2002 08:40 AM

In a carbureted gas engine, there could be some instances where this could improve fuel atomization to a point of overcoming the decreased flow. This would be a rare situation.

In a diesel engine there would be no gain, and probably a loss. In a diesel the fuel is inected into the compressed cylinder in which case turbulence of incoming air would do nothing except inhibit air flow.

For someone selling such Snake Oil, if they can find even one instance in which they can scientifically show some sort of gain, that is the example they will cite. They will ignore the zillion other examples in which there was a loss.

Have a great day,

G-Benz 01-02-2002 10:19 AM

We've been down this road before...

http://www.peachparts.com/shopforum/mercedes-benz-performance-paddock/23594-spiral-intake-thingy.html

http://www.peachparts.com/shopforum/showthread.php?threadid=19739

http://www.peachparts.com/shopforum/tech-help/17618-tornado-does-work.html

nuff said...:rolleyes:

blackmercedes 01-02-2002 02:32 PM

Larry's right. Snake oil. Like these guys have some engineers that are just so much smarter thant he guys that work at ALL the car companies. Just a load of BS...

Waste your money if you want...

ERASE 11-22-2003 07:23 AM

Proper Installation helps.
 
To get the most out of the Tornado fuel saver you must go beyond the manufacturers recommended installation directions. If not you won't see any difference in fuel economy or performance. Installed the way the manufacturer tells you to do it in the directions merely protects the manufacturer of the Tornado product from possible liability lawsuits resulting in the possible increases in horsepower and the potentially reckless driving that may follow during testing of your new found horsepower.

First off- don't bother installing the unit near the airbox- waste of time. It will be too far from where it needs to be to deliver maximum performance.

Obviously what we want the most is an increase in horsepower from the rear wheels?

Mounting the Tornado further down the line will help. Mounting it near the beginning of the power chain...i.e. the very start.... the airbox... won't help much.

Getting the unit closer to the fuel intake helps.

Mounting the unit just before the gas intake will help as well.

But better still you will find if you increase the diameter of the tornado you will get more power. Just like more powerful tornadoes in real life are larger...

So if you take the Tornado as a model to enlarge, we are getting somewhere. But why stop there? Let's face it Jay Kim, the inventor of the tornado, isn't a rocket scientist. There are better devices designed to swirl the air out there made by companies with huge R & D budgets.

Lockheed, Boeing..etc..

So what you need to get is a real turbine fin and a housing . But miniature. Where can you find a unit like that? Well the military has been using these for years and they are available cheap as surplus. Some have even been confiscated from Drug Lords and are available at government auctions at super low prices!

These miniature devices are called Jet Assisted Take Off units. Again, where to mount this? Not near the air box (the beginning of the power chain)- the resultant heat wouldn't be good either.

No- optimally, near the very end of the power chain. Where is that? As close to the rear wheels as possible. Sounds crazy doesn't it? But there will be the most direct increase in force.

Here is a third party testimonial of this type of installation.

The operator was driving a 1967 Chevy Impala. He ignited the JATO unit approximately 3.9 miles from the crash site. This was established by the location of a prominently scorched and melted strip of asphalt. The vehicle quickly reached a speed of between 250 and 300 mph and continued at that speed, under full power, for an additional 20-25 seconds. The soon-to-be pilot experienced G-forces usually reserved for dog-fighting F-14 jocks under full afterburners.

The Chevy remained on the straight highway for approximately 2.6 miles (15-20 seconds) before the driver applied the brakes, completely melting them, blowing the tires, and leaving thick rubber marks on the road surface. The vehicle then became airborne for an additional 1.3 miles, impacted the cliff face at a height of 125 feet, and left a blackened crater 3 feet deep in the rock.

Most of the driver's remains were not recovered; however, small fragments of bone, teeth, and hair were extracted from the crater, and fingernail and bone shards were removed from a piece of debris believed to be a portion of the steering wheel.

You see if you buy a Tornado you should also increase your car's braking potential, tires, and downforce aftermarket fins, as well as suspension. At that cost you see you are better off selling your car and buying a better one.


All times are GMT -4. The time now is 01:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website