![]() |
Transmodulator Adjustment/Replacement Question
I did some searches on the forum to see how to adjust and replace this item, but I could not find how this item is removed. Is it bolted on? or screwed on?
|
Not sure which model you are working on, might not matter. Typically there is a bracket at the base held down with a 10mm head bolt, you remove the bolt and bracket and it pulls out. You might lose a little fluid in the process.
Gilly |
Sorry Gilly, its the 722.3 transmission for the 1989 M103 300E.
Thanks for the information, I am going to rent a vacuum tester tomorrow to see if it holds any vacuum for at least 30 seconds. Otherwise, I am going to get a replacement. |
|
Thanks for the link!
I really hope I just have a vacuum leak somewhere else, really don't want to have to lower the transmission... :o |
All times are GMT -4. The time now is 09:16 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website