Removing front driver handle
 

Please can anyone send me some pictures how to remove front driver door handle for change purposes, also changing the lock cilinder(pulling out)
for Mercedes Benz 190E,1987,2.0 benzin, mech gear.

THANKS

interior or exterior

On the inside of the door there are two rubber caps. IIRC it is the top one. Remove the cap and you will see a hole. Use a small hex key and turn it a couple times CCW. Now insert the key, turn it and pull towards the rear of the car. It should come off now.

Already tried that, but didn't know that have to use the key.
Otherwise, how to take of if I don't have the key(meaning original)
I'm changing both front doors, but the owner lose the key.

ANYWAY THANKS A LOT MATE.

Call your local MB dealer and order a replacement key. Need to show proof of ownership.

It can be done without the key, will need to detach the latch assembly from the inside so that the entire assembly can be rotated to disengage the lock from the latch assembly.

If tossing the lock assembly, it would be easier to just drill the lock.

Help again needed
 

Well, my friend, can you help with photos.please, so I can understand witout translating.
THANKS A LOT, AGAIN.