PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   CIS 3MAdjustment tool (http://www.peachparts.com/shopforum/tech-help/29077-cis-3madjustment-tool.html)

ChinaClipper 01-04-2002 08:56 PM
CIS 3MAdjustment tool
 
Hey, I was wondering were I can purchuse a 3MM allen long enough to reach my mixture control on both the 86 190E and 86 300E, Any ideas? Costs? Thanks.....

Benzmac 01-04-2002 09:37 PM
I have seen a few on E-bay.

intruder 01-04-2002 10:27 PM
Try ************************ to get their 800 number; that's where I got mine. It was OEM tool,

part number 000 589 14 11 00.

Also see if you can get it through fastlane.

Good Luck

Intruder

georgehifi 01-04-2002 11:59 PM
Get a normal allen key hack the bent bit off and ram it into the correct size alluminium tubing and bend the end of the tube to 90degrees for a finger turner, and there you have it.

autounion 01-05-2002 06:44 AM
cis tool
 
craftsman 't'-head allen wrench is perfect.


All times are GMT -4. The time now is 12:14 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website