|
|
|
#1
|
|||
|
|||
1988 190E auto trans gear ratio??
Where can I find this information (1988 190E auto trans gear ratio) for this trans?
|
#2
|
|||
|
|||
1st) 4.25/1
2nd) 2.4/1 3rd) 1.48/1 4th) 1/1
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
1984 190D automatic trans crossed with 1988 190E trans?????
I am in the process of converting my 1988 190E from gas to diesel. I have a good 2.2 diesel from a 1984 190D to slip in. I would like an expert opinion regarding the use of an 84 190 diesel trans torque converter in an 88 190E trans body. I will have to use the diesel flywheel or flex plate, my observations and measurements show this combination will match up fine. My main question and concern is that the diesel torque conv. is physically smaller in dia and no doubt fluid capacity vs the gas conv. Also I realize the gas engine will generate higher rpms much quicker than the diesel. What performance results can I expect with this combination????
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|