idle and stalling.
 

Hello Ron,

My staling problem is also finally fixed. After two air mas sensors my shop finally decided to check the wires from the sensor to the ecu, and behold,...big surprise, the wire was broken. They taped it up and problem solved. I´m a happy Benz motoring guy again.

have fun,

Marc

@gilly:
i had the wiring harness replaced, then i believe another problem occured: the engine stalls when hot on decelleration for the first few hundred feet. what do you mean by relearning throttle stop and how is it done?? besides one stall when moving out of a parking lot engine idles and runs very smooth.btw it is winter here so problem is subsiding.(could it be a temerature sensor and which one???)
thx and happy new year
reinhard