hi i have to take the flexdrive off my drive shaft but i dont know how to do it has anyone ever replaced one and can tell me how to do it?

One critical tip for you...when you take the driveshaft off, be sure to mark it so you can put it back the same way.

The driveshaft is professionally balanced and i you do not put it back in the original position, you will have major vibrations.

__________________
Ben
1987 190d 2.5Turbo

okay but how do you take it off? can i take it apart from the rear flex drive and pull it back in order to get the front flex drive off?

is this true? I'm having vibrations on the freeway above 70mph...definitely coming from the driveshaft area.

As for removal, unbolt at the front flex disk and pull down. Remove the transmission crossmember that holds the mount or you'll struggle with space (obviously support tranny when you remove this)

__________________
2016 Monsoon Gray Audi Allroad - 21k
2008 Black Mercedes E350 4Matic Sport - 131k
2014 Jeep Wranger Unlimited Sahara - 62k
2003 Gray Mercedes ML350 - 122k

That's how I replace the front flex disc on my '93 190E. I had to remove the rear one to get enough clearance to remove and install the front one.

Make sure you mark it so it goes back on the same way to keep it balanced.

__________________

1993 190E 2.3
2001 SLK230
1971 LS5 (454) Corvette Convertible