PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Front Flex Disc (http://www.peachparts.com/shopforum/tech-help/295621-front-flex-disc.html)

balge 03-17-2011 02:57 PM

Quote:

Originally Posted by Kestas (Post 2680305)
No, it was my front flex disc. I bought the car at 52K, so I don't know whether it was replaced before that... I kinda believe it was original.

Fastlane shows the same part number for both front and rear flex discs.

So you think the car was fitted from the factory with the rear type disk at the front? And you replaced it with a rear type disk and no problems running like that?

cheers!

lsmalley 03-17-2011 03:00 PM

right now I'm running both rear discs on front and back and I have no issues at. but I ordered the front disc and a transmission mount. unfortunately, my transmission mount was saturated with oil and I didn't know what it was at first. thought it was just a pan that held a bunch of grease so I started pulling out these chunks of grease not realizing it was the greasy, deteriorated remains of my transmission mount

Kestas 03-17-2011 03:03 PM

No problems that I can detect.

balge 03-17-2011 03:51 PM

OK i'll come clean...when I got my 300TD I could tell it needed a flexdisk, popped under the car confirmed the propshaft knocking (centre was ok ) so went off to order a disk for it.....got a rear one ...without checking which...(autopilot - just done the rear one my230 :o)

Finally got round to setting up to do the disk and obviously it was the front disk that was knackered :eek:

The current rear looks perfect ...so I'm tempted to just throw the new rear disk on the front just to get it done...hence asking if anyone has done it without problems. Especially as it's listed as 'Taxi' option - cos with all the running around for the missus & sprog I do call my wagon (quietly) 'The Taxi':D

Sounds like works ok, and would save grief, P&P, exchanging it ...

lsmalley 03-19-2011 12:52 AM

1 Attachment(s)
Ok so the new flex disc came in today (the front one), so I swapped them out and now everything is where it should be, the front disc is on the front and the rear disc is on the rear. while I was under there I checked the rear flex disc and it was still in excellent shape, no cracks or loose bolts to report. so I guess I have a spare one just in case. I also did my transmission mount. check the photo out of what it looked like.

whunter 03-19-2011 10:58 AM

Quote:

Originally Posted by lsmalley (Post 2683167)
I did my transmission mount. check out the photo of what it looked like.

:eek: :eek: :eek:

What transmission mount? :D

Yuck, ick, eweeee... :D

lsmalley 07-20-2015 03:58 PM

Uro Part Flex disc (update)
 
1 Attachment(s)
Just a brief update. I'm not marketing or promoting this brand in anyway, but I just thought I'd mention that I installed Uro brand flex disc 4 years ago around 278,000 miles, I am now at 366,985 miles and the flex disc is still in great shape. No cracks.

oldsinner111 07-20-2015 04:49 PM

pretty soon every thing will be chinese,unless your a farmer.


All times are GMT -4. The time now is 05:19 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website