PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   W202 Service won't reset! Ahhhhhhhhhh.... (http://www.peachparts.com/shopforum/tech-help/297853-w202-service-wont-reset-ahhhhhhhhhh.html)

mpolli 04-23-2011 10:55 PM

W202 Service won't reset! Ahhhhhhhhhh....
 
I have reset the service interval many times over the last 7 years, but it won't reset this time. I may have had the same problem last time also, since it is now "-5200". Is it still possible to reset it even thoughit went over the "interval"? I tried about 10 times and nothing. Sometimes it would give a beep like the completion beep but it still displays "-5200".

Thanks

'98 C230

daddi 04-23-2011 11:03 PM

Close the driver door.

oldsinner111 04-24-2011 01:48 PM

I have the same problem with my w140 and my door is always closed because of that anoying buzzer.

mpolli 04-24-2011 05:42 PM

The first 5 times I tried were with the door closed. Then I tried with the door open. Then I tried again with the door closed. No difference.

duxthe1 04-25-2011 08:47 PM

The little button may have gone bad, and isn't being recognized when pressed. Last one I saw with that problem would reset with the SDS.

mpolli 04-26-2011 01:33 AM

Quote:

Originally Posted by duxthe1 (Post 2706664)
The little button may have gone bad, and isn't being recognized when pressed. Last one I saw with that problem would reset with the SDS.

Well, it resets the trip gauge fine, so looks like it reads the button OK.

mpolli 04-27-2011 12:09 PM

-5300 now. There's no stopping it!!!

Gilly 04-27-2011 06:03 PM

If it helps at all, I've never heard of there being any problem with a reset just because you are way over on mileage or time; it should reset just as before. I don't know what else to add, you seem to have reset the FSS many times before so it's hard to believe you are doing it wrong, so I would also guess a bad cluster.
Yes the door should be closed.
Hey unless there is a problem with the drivers door jamb switch. Do you have the dome light switch set so it comes on when the door is open? If you have the switch set to "off", then the door jamb switch could be bad and you might not know it.
Gilly

mpolli 05-01-2011 06:20 PM

Door switch working fine, turns lights on and off. Tried to reset again today, door closed. No luck. Now at -5500....
Help someone!!! I must find a way to reset without paying the dealer a fortune.

JohnM. 05-01-2011 06:31 PM

Try unhooking the battery for half an hour or so. Its a shot in the dark, but it might do something to make the button register. Also try putting a little sideways pressure on the button while pressing it if you can. Outside of replacing the cluster......IDK

mpolli 05-17-2011 03:37 PM

I ordered the "38 pin reset tool" from Ebay. Worked like a charm. God bless China!


All times are GMT -4. The time now is 11:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website