|
|
|
#1
|
||||
|
||||
HOT Ignition resistors
Are my resistors, for the ignition supposed to get fairly hot? They're getting hot enough to melt plastic (some loom resting on them)
__________________
RIP: 80 300SD RIP: 79 450SEL 2002 E430 4matic (212,000km) 2002 ML500 'sport' ____________________________ FACEBOOK: PANZER450 |
#2
|
||||
|
||||
There should be nothing resting on the resistor block...so moot point....and yes, they get hot, any resistor will get warm to hot depending on resistive load. Ohms law or summink.
|
#3
|
|||
|
|||
Normal, but move the wiring away from them..
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#4
|
||||
|
||||
yeah, I moved them away...My inner fender is rusty so I have them zip tied away from things, I'll have to make some sort of stand-off...I was just curious if they were supposed to get real hot or not...
__________________
RIP: 80 300SD RIP: 79 450SEL 2002 E430 4matic (212,000km) 2002 ML500 'sport' ____________________________ FACEBOOK: PANZER450 |
Bookmarks |
|
|