PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Voltage for opening cold start injector? (http://www.peachparts.com/shopforum/tech-help/30058-voltage-opening-cold-start-injector.html)

300EVIL 01-20-2002 08:22 PM
Voltage for opening cold start injector?
 
What voltage is used for opening the cold start injector on my 87 300E ? also what is the average fuel pressure from the fuel pump?
Thanks!
Adam

vinamg 01-21-2002 02:02 AM
Cold Start Injector-12V

System operating pressure 5.3-5.5 bar

Lower chamber (operating temp) 0.4 bar below measured pressure

Residual pressure (after 30min) 2.5-2.8 bar


Vin


All times are GMT -4. The time now is 06:54 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website