PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Front Stabilizer Bar Bushings (http://www.peachparts.com/shopforum/tech-help/300855-front-stabilizer-bar-bushings.html)

big dog 2 06-23-2011 12:00 PM
Front Stabilizer Bar Bushings
 
1989 300E

Got 4 new bushings (2 for the left and right center and 2 for each end).

Just unscrew the brackets, take off the bar and slide on the new bushings or is there something else?

ps2cho 06-23-2011 03:43 PM
Quote:
Originally Posted by big dog 2 (Post 2740330)
1989 300E

Got 4 new bushings (2 for the left and right center and 2 for each end).

Just unscrew the brackets, take off the bar and slide on the new bushings or is there something else?
They will be tough to remove. Use rubber mallet to remove and install. Soak new bushings in boiling water to allow for some extra help...it's the bends that are hard.

oldsinner111 06-23-2011 04:00 PM
Think I'll unlosen them and wrap bar and bushing with tape.Then mount brackets back.Let the next guy replace them.

lee polowczuk 06-23-2011 09:38 PM
45 minute job..no big deal.

big dog 2 06-25-2011 01:28 PM
Bushings
 
Quote:
Originally Posted by lee polowczuk (Post 2740695)
45 minute job..no big deal.
Yea, it was easy!

For once a DIY job with no problems! LOL!


All times are GMT -4. The time now is 07:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website