![]() |
C holmes.
I just went through this problem. first, verify if you have spark. If you do, then it is most likely fuel related. Pull your MAS sensor, and put a jumper wire betweeen pins 1 and 2. Now start the car. if the car sarts, then the MAS is probably bad, or the connections need to be cleaned. Also check the fuses on your OVP relay. Let us know what happens. Mat523 also if the car is running, and dies when it is warm you may be dealing with a faulty temp sensor |
I have put a new OVP in it, but I will jump the pins on the MAS
|
All times are GMT -4. The time now is 12:26 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website