![]() |
|
|
|
|
#1
|
|||
|
|||
400se , LH-SFI code, no clue ..
Hello benz lovers am new here ,
I have a big problem , after 36 months i was able to start my car but theres some problems now , is hard to turn the engine on and if i press the gas pedal to fast the car will turn off ,i can note that theres a small misfire or jump once i a while . I pull some codes and the most importants are these : Socket 8 :voltage suply for LH-SFI control module interrupted Socket 17 :magnets for crankshaft position sensor not recognized I have replace: fuel pumps , Maf , wire harness , fuel pressure regulator , spark plugs , caps , rotors ,crankshaft position sensor , all filter and fluids including new gas . Thank you very much i hope you can help me Ps : is a 1992 400se m119 engine |
#2
|
|||
|
|||
Most likely the fuel needs to be drained & the fuel filter replaced before doing anything else at all!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Is the problem resolved ?
|
![]() |
Bookmarks |
|
|