Hello everyone,
I am replacing the water pump and it came with the rubber o ring and a regular gasket. Do I use both or just the rubber o ring?
Thanks Dan

I left out that the car has the o ring in it now, but the pump came with both and I'm didn't know if this is an update or there are two different pumps. the gasket fits the pump fine and I'm not sure about using both

If it had an o-ring, use the o-ring. That pump fits lots of models so they are shipped to cover all options.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

I used the o ring on my replacement water pump and it seems to be fine.

__________________
DS
2010 CL550 - Heaven help me but it's beautiful
87 300D a labor of love
11 GLK 350 So far, so good
08 E350 4matic, Love it.
99 E320 too rusted, sold
87 260E Donated to Newgate School
www.Newgateschool.org - check it out.
12 Ford Escape, sold, forgotten
87 300D, sold, what a mistake
06 Passat 2.0T, PITA, sold

Las Vegas NV