|
|
|
#1
|
|||
|
|||
M102.963 timing chain
Hi,
Can someone tell me how I remove the timing chain guide retaining pins on the cylinder head. It's a 230CE W124 M102.963 Many thanks |
#2
|
||||
|
||||
2 ways:
1. Thread a bolt in and use it to pull out with a slide hammer. 2. Thread a bolt with a stack of washers in so that the pin gets pulled out as you screw in.
__________________
Prost! |
#3
|
|||
|
|||
cheers for that.
the slide hammer did the job...a couple of good dunts and that was it. Many thanks again for your reply |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|