![]() |
|
|
|
#1
|
|||
|
|||
valve body 722.323 tranny
Hi Guys!
I am working on a overhaul of my tranny 722.323 from a mercedes 560 sel. Shifting was good / smooth but there was no kickdown, leakage and some white stuff in the oil. so I thought give it a complete overhaul+cleaning. I do have the ATSG and Transtec manual but when I removed the valve body I noticed two difference. 1) The valve body seperated from the tranny housing and put it carefully on a clean desk. Nothing dropped out or left on the housing. They are asking to remove the "drain valve LB3" (nr. 86 in ATSG manual) or nr 1 pressure release valve in transtec manual, and attached as jpg. but this one is missing! Is this normal or maybe serial number related?? serial nr. tranny 722323 02 766291 2) when seperating the valve body I noticed that ATSG is telling me the location of the "pressure valve nr. 14a". In the Transtec manual it is mentioned as "nr. 6" with a spring. But on this exact location there is only a ball installed without a spring. And just below of the location "14a" @ ATSG or Transtec picture with pirple "?" ; is showing another ball, which I don't have....There isn't also any room for another ball... (the picture is from the transtec manual 722.3 but gives the same picture) Can anyone help me with this one? I am 300% sure nothing lost or dropped out...I worked on a very clean table with only this stuff. thanks in advance! |
Bookmarks |
|
|