|
upper control arms w126
i need the upper control arm replacement procedure for my 89 300se it looks fairly simple but i could use input from someone who's already done it,thanks for any help on this.
|
nothing to it, except getting the old bolts out because they are long. but, remove the nut at the spindle, break the joint, the unbolt it from the car. replace the bushings for the sway bar, also. good luck, chuck.
|
| All times are GMT -4. The time now is 03:16 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website