Service Codes
 

Hi all,

re. 1999 C280 (W202). Car is new to me (used w 144000 km on it... seems to be running well).

I have just reset the FSS (service warning) to 15000km (Canada) after oil change etc (new filter, new oil, air filter, accessary/serpentine belt).

1. While messing around trying to figure out how to reset the FSS warning I encountered another code: 2.8 (upper field) and I think 37 and 5 in the lower field. What does this information mean?

2. I also "discovered" how to do the oil level check... and I am wondering what else can be accessed via the "odometer" button/start key and display field... any thoughts?

3. Is there an after market third party tranny dip stick out there for this car?

2) change language on cluster.

3) AST tools or Baum tools