Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-27-2002, 02:06 PM
Registered User
 
Join Date: Jul 2001
Location: Boca Raton Florida
Posts: 26
93 300E Headlamp door removal

Trying to remove my faded headlamp doors on my 93 300e , came across a new set , started looking at it today , but looks different from my 190 , no thumbwheels for the turnsignal removal, or like the 190 2 bolts that hold the assy in

if anybody has done this , please advise i would appreciate it .

still love this forum , a great service to all mb owners !! thank you
__________________
1985 190 2.3
1993 300e 2.8
Reply With Quote
  #2  
Old 01-28-2002, 12:33 AM
tex tex is offline
Registered User
 
Join Date: Nov 2000
Location: reno, nv
Posts: 32
Pressing a plastic tab on the back of the
turn signal (which is attached to a clip)
releases the signal assy. When released,
the turn signal assy will slide straight
forward. Look on the driver's side where
there is more room to explore with a
flashlight. It might help to loosen the
exposed fasteners on the headlight assy
if the signal assy is stuck.

The headlight assy is held in place by
a plastic locating pin on top, a hex
screw on the inboard side, and two hex
screws on the outboard side that are
hidden by the turn signal assy. The
narrow body panel below the light is
attached to the headlight on the inboard
side and the fender body panel on the
outboard side. You must remove the
screw from the inboard side of the body
panel. You may only need to loosen the
screw on the outboard side of the body
panel, but be careful not to bend the
panel when removing or replacing the
headlight assy.

I cannot tell you anything about the
headlight wipers, if you have them.
I do not.

Best of luck.
Darrell
Reply With Quote
  #3  
Old 01-28-2002, 07:25 PM
Registered User
 
Join Date: Jul 2001
Location: Boca Raton Florida
Posts: 26
Thanks very much , will give it a shot this weekend , the darn plastic is very brittle from what im seeing already , tried taking the fog light removal panel off yesterday darn tab broke right off gonna have to keep the epoxy handy i can see already

john
__________________
1985 190 2.3
1993 300e 2.8
Reply With Quote
  #4  
Old 01-29-2002, 10:38 AM
anm
Guest
 
Posts: n/a
If you have wipers, be careful when removing the panel under the headlight - you'll pull on a few hoses and they may break...

You'll also need to remove the wiper arm (8mm nut) before removing the panel.

andre
90 300e
02 ml320
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rebadging '87 300e emr0591 Detailing and Interior 6 09-04-2007 10:12 AM
'86 300E vs '91 300E... Any opinions out there??? pjtib Tech Help 23 05-04-2005 10:26 PM
300E FIRST-gear start brewtoo Tech Help 16 03-11-2005 06:27 PM
*CLEAN* W124 Gray MB-Tex Front Seats / 300E 260D 300D (300E 2.8) and (W124 Wagons) FA22 Mercedes Used Parts For Sale & Wanted 5 03-01-2004 09:40 PM
Transmission Question 1988 300E (Need Technical help)n china beach Tech Help 4 03-26-2002 11:25 AM



All times are GMT -4. The time now is 03:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page