PeachParts Mercedes-Benz Forum - Contemplating DIY M140 engine replacement 95 e320

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- Tech Help (http://www.peachparts.com/shopforum/tech-help/)

- - Contemplating DIY M140 engine replacement 95 e320 (http://www.peachparts.com/shopforum/tech-help/304485-contemplating-diy-m140-engine-replacement-95-e320.html)

DieselJim

08-31-2011 01:27 PM

Contemplating DIY M140 engine replacement 95 e320

M104 engine. Duh!
Any good DIY links or tips if I decide to put a used engine in my Benz?

oldsinner111

08-31-2011 03:08 PM

I think engines must match trans.Like a 96,an97 engine and trans is different from the 98,an 99.

DieselJim

08-31-2011 03:22 PM

Thanks :) I kind of figured out what engines I need. I was thinking more the practical side of getting a hoist and pulling the engine. Do I do it with the tranny? Without the tranny? I assume I would put in new mounts. Etc

oldsinner111

08-31-2011 06:03 PM

I always pull with out a trans.Just to hard to lift the whole mess out.

engatwork

08-31-2011 06:39 PM

I pull em out with the tranny attached and can typically get one out in about 4 and 5 hours.

All times are GMT -4. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website