|
|
|
#1
|
||||
|
||||
Gen II Sunroof seal molding rivet help
Hey guys,
Following the Glass sunroof retrofit, I opted to replace my aging sunroof seal with a new W140 glass sunroof seal. The steel roof version is continuous between W126 and W140, but the glass seal is a different part number. Also costs twice as much and looks veeery similar Anyways, The front and sides have screw on moldings that hold the seal in place, fine and dandy. Now, the rear is a long strip with six rivets in it. a few of these have popped out, causing quite the headache with sunroof operation after installation... Does anyone know how I fix this? I don't know how to/have a rivet gun, and being in a tight space, don't see how I would fit it in there anyways... Thanks for the pointers as always, Carlen
__________________
_______________________________________________ 1987 560SEL (210,000 miles) |
Bookmarks |
|
|