no start issue....again
 

OK fellow enthusiasts....

patient is 1987 420sel

symptoms = no start condition

car will crank but no start
previously after i changed the ezl module it started for a couple of days, but now back to prevous state

when it started, the minute i put my foot on the gas to slowly rev up, the engine would die and just cut off

i would have to floor the pedal to keep it going...there has to be something amiss....what it is i am going to need help with.

suggestions please.......

thanks in advance...

lyle in marfa, tx

We always tackled no-start issues with this formula./

FIVEM!

F=fuel & on that car you need 100psi of fuel pressure
I= ignition & you should have enough spark to jump a spark plug with a gap of 0.1"
V=vacuum & you should have 150lbs of compression
E=electrical & you want to make sure that the OVPR is powering up the computer
M= mechanical & of course make sure that the timing chain is intact & cams are in time


OVPR= over voltage protection relay