Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-05-2002, 02:19 AM
arnelrac
Guest
 
Posts: n/a
Angry Cold start problems

Hi everyone! New here. Seems like a great site with many great advice. I currently have a problem which I'm sure has been asked before. Yes I did a search, but couldn't find a specific answer to a possible solution. Hope someone can help. I have a 1987 190E 2.6 with about 150,000 miles in it. It is a rough estimate because the odometer stop. I purchased the car back in 1997. I'm not a mechanic, but knows the basic tune-up. Starting the car during the cold mornings seems to take about 6-8 cranks with some extra gas pumps to get it started. When it starts you get some shakes in the engine. But once it is warm and running. It runs great!. I have had the car for about 5 years and waited to replace some of your basic tune-up parts such the spark plug wires, distributor, rotors, and fuel filter, from what i remember, because of the cost. This past week I went ahead and spent the money and replace all what I mentioned above including new spark plugs & air filter. Thinking that it may help the starting problems. I haven't finish replacing the fuel filter, but the result after changing the above parts hasn't change. It's still hard to start. Is the car getting too old? As far as I know the alternator & starter are still the original. I feel after spending the money on the tune-up, I feel that I should have gotten better results. Hope someone can help. Thanks in advance.

Reply With Quote
  #2  
Old 02-21-2002, 01:15 AM
arnelrac
Guest
 
Posts: n/a
Update

Problem fixed. Thanks to Steve B. It was the OVP relay. I reposted with a different description which seem to help(See thread "Engine shakes after Antilock sensor went on??")

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inconsistent cold start behavior, 300E DavidB29 Tech Help 23 03-06-2007 08:44 PM
300E Cold starting problems... (-88) Sundman Tech Help 28 03-23-2004 10:35 AM
16V cold and hot start problems YIN Tech Help 36 11-13-2002 08:10 AM
190e voltage regulator, cold start valve, EHA Machnumber2 Tech Help 1 08-29-2002 07:50 PM
Cold Start Injector Max J. Sandler Tech Help 2 08-18-2002 02:49 PM



All times are GMT -4. The time now is 02:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page