420 SEl instrument cluster out!
Hello out there!
The instrument cluster went out on my 90' 420 SEL. I started the car a few weeks ago and the fuel, temp, oil pres and speedometer were all dead. I pulled all the fuses to make sure they were not blown and making good contact and the instrument cluster started working again. This time it is out for good. I Did the same thing with the fuses and nothing, and now, my brake lights are out as well. All fuses are ok...Any thoughts would be kindly appreciated. Thanks |
OVP or OVP fuse may be the problem.
|
OVP Relay
Thanks NJ300. Where is the relay located so I can check the fuse? 90 420 SEL.
|
Its may be near the brake booster (inboard) on the back firewall. Small cover, mine is clear. Uses a "U.S." style fuse. 10 amps ONLY.
|
LYL
Thanks LYL I will check it out tomorrow
|
Fuse intact
Hi Lyl, I checked the fuse and it is ok. I was thinking it could be the OVP relay but wouldn't the fuse have blown if there was any problem in the circuitry? Any other suggestions would be appreciated.
Thanks |
Could be any number of things. I am not sure about the OVP relay being the problem, but they can go bad. Maybe take yours apart and decide if you want to refresh it. I re-soldered mine, it was pretty bad.
|
All times are GMT -4. The time now is 05:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website