How much does 124 transmission weigh?
And if I wanted to overhaul one, does it just take a typical stand to keep it pointed up? Or something more special.
|
I would guess around 110 pounds less TC. I used clean concrete blocks.
|
Quote:
|
Quote:
|
I'd say no more than 40 kilos.(empty - no TC) I pick them up and move them by myself.
Last time I used two guys - Myself and my mate - he dropped his end on my foot and broke two of my toes. |
I think the last time I Dragged one around, I remember it being too Heavy to lift. it probably had the TC on. Or I'm getting weak....
|
Its too heavy to remove from the car and reinstall without a transmission jack.
|
My trans out of my 2.3 w201 weight 91lbs. No Trans jack needed.
|
Answer
Transmission
722.3 shipping weight is 63kgs = 138 lbs. 722.6 shipping weight is 80kgs = 214.34 lbs. |
Quote:
|
Answer
Quote:
|
That is with the TC installed though most likely.
|
Answer
Quote:
. |
It threw me off reading "TC". Having dealt with 4x4s many times.
I thought you were meaning "transfer case" and was thinking; "WTF???". :D http://siliconangle.com/files/2011/08/homer-doh.jpg |
Quote:
Last time I changed a 722.3 under the car I didn't have a tranny jack. Used a normal floor jack with a flat board bolted to it. I wouldn't do it again - I lucked out and got the tranny mounted to the engine first go. Next time I'll use a special tranny jack. |
All times are GMT -4. The time now is 04:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website