Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-22-2012, 10:55 AM
Registered User
 
Join Date: Jun 2012
Posts: 3
Heat only works first time in the morning

2000 C230 Kompressor 110K

My car has dial for temperature control. It blows full cold air no matter the dial setting, except on defrost, which indicate the heat core is not blocked. I remove and cleaned duo-valve, it looks fine. I test the voltage on the three pins which operates the valve. On defrost mode, the voltage is 9.24 constant; 13.86V constant on all other temp setting, which I think it should be intermittent depend on the temp setting.

For the last two days, I found the climate control is normal when I start the engine in the morning. It stays that way until I stop the car and restart it.

I have a coolant flush several weeks ago and I also change Engine Coolant Temp Sensor and thermostat three days ago(I thought it might be the problem and does not cost much and also never been change).

So, guys, any idea that the problem might be? Thanks.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page