Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-24-2002, 11:36 AM
pilot7205g
Guest
 
Posts: n/a
Question no heat

i have a 82 30dt just purchased, first mb i have no blower operation in any mode. it seems like there is a little heat coming out of the defrosters when driving down the road. i also have an issue with the vac system,you have to lock the drivers side door to get the car to shut off. can you tell me if it is suppose to shift like it has a shift kit in it? the guy that use to own the car told me it has 483k miles on it,he drove it 200 miles a day. it seems to run strong except i seem to think it has no power at take off,but i am use to gas engines,goes down the road at 75 with no problem but on a hill you have to push it to the floor and it will maintain speed. any help or insight would be very much appreciated. i also do all my own work,at least on american made cars. but im going to learn. thanks.

Reply With Quote
  #2  
Old 02-24-2002, 02:41 PM
Registered User
 
Join Date: Dec 2000
Location: charlotte hall md.
Posts: 248
You have a serious vac leak.there is a good bit of how to info in the archives and on the club site good luck Michael

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interesting Post on AC from the Ritter/Easley Board ctaylor738 Tech Help 4 08-08-2003 06:36 PM
Plenty of heat...little heat....slow down...heat comes back Dirty Ern Diesel Discussion 15 04-02-2003 11:48 AM
injector heat shields for a 300D - are they necessary? Kent300D Diesel Discussion 13 09-19-2002 11:18 PM
New AC Servo and Amp, Still Full Heat Elripster Tech Help 2 11-27-2001 09:35 PM
New AC servo and amp, still full heat Elripster Diesel Discussion 0 11-26-2001 08:38 PM



All times are GMT -4. The time now is 09:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page