![]() |
'91 300CE M104 - exhaust leak at pipe to manifold
I don't know if this is causing some of my driveability problems, etc, but I have a rich-running '91 300CE with a very noticeable exhaust leak where the rear exhaust pipe connects to the rear exhaust manifold. Rev the motor and you can see black smoke blowing out the joint...
Is there a gasket here or not? I don't see one on the online manual...so if there's no gasket can I just tighten it up - or is there some other reason for the leak? Thanks, Ryan |
No gasket, metal to metal fit. Make sure the flange holding the pipe to the manifold is straight (bolts tightened evenly).
|
All times are GMT -4. The time now is 04:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website