replacing bumper molding
I will be replacing the damaged front bumper molding from my 1990 300e with one from a 1993 300e. I have read all instructions from the FSM, and visually scouted out the job. I am wondering how to remove the 14 "clips". The FSM lists a special tool,but certainly there is another way,right? Any tips or advice you have on doing this job will be greatly appreciated.
Thanks, donno |
No special tool needed. Just have to be careful with a screwdriver to pop the clips loose.
|
All times are GMT -4. The time now is 03:41 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website