Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-29-2000, 06:23 PM
Registered User
 
Join Date: Jul 2000
Location: Toronto, CANADA
Posts: 1,193
What is the average oil consumption of an 86 420SEL with 180,000 miles? I have noticed what seems to be a rise in oil consumption so I have started to track it. It hasn't been going on long enough to say it is a problem. Yesterday I had to add two quarts, and I check my oil every week. I park the car in the same spot every day and there is no oil under the car. The oil filter housing seems to have a very thin coat of oil on it, but does not look like a big enough leak for two quarts in a week (60 miles of driving). I have not had too close a look at the engine itself, and thanks to daylight savings time it is already too dark to look tonight. Has anyone had any experience with this model and excessive oil consumption? Before this it was arount 1 quart for 1000 miles, acceptable to me. What probable problem areas ahould I be checking.

Thanks,

JP Toronto

------------------
Jason Priest
1986 420SEL

Reply With Quote
  #2  
Old 10-29-2000, 07:50 PM
Hunter
Guest
 
Posts: n/a
Jason,
I use about a quart every 800-1000 miles of driving, and I have no concerns. I just put two quarts in today, a little more consumption than usual, but still no real concerns. Occasionally I will see a small puff of blue smoke when pulling out from a light, etc... no other remarkable items other than that, and the car runs great, strong and quiet. 170K on odometer.
Reply With Quote
  #3  
Old 10-29-2000, 08:19 PM
Registered User
 
Join Date: Nov 1999
Location: Germany
Posts: 63
I have a 87 420 SEL with 230,000 miles, and I'd say you are ready for a valve job, which is common for a W126 with high mileage - had mine at 200,000. The oil loss you are experiencing is primarily around the valve stems, and new valve guides will correct that. Mine uses no oil at all now between 3,000 mile oil changes.
Reply With Quote
  #4  
Old 10-30-2000, 09:56 AM
Registered User
 
Join Date: Jul 2000
Location: Toronto, CANADA
Posts: 1,193
Thanks Hunter and Joe.

Roughly how much $$$ are involved in a valve job? What exactly is a valve job, and how is it done?

JP
Reply With Quote
  #5  
Old 03-03-2002, 12:39 PM
Devany
Guest
 
Posts: n/a
Update?

JP, Any update. Appears I may also need a valve job. Interested in knowing what you decided to do and cost.
Reply With Quote
  #6  
Old 03-03-2002, 12:56 PM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
The problem is always valve guide oil seals. The labor by factory guide is 5.5 hours. It always fixes the problem unless you have a guide that is loose in the head. Such a condition is the only reason to do a valve job. BTW the valve job is rated at over 25 hours by the same guide.

Our procedure in cases where a large increase in consumption has occured is to pull the plugs and look for a cylinder in failure (significantly larger carbon accumulation on plug). We then do the seals on that cylinder first, looking for loose guides. If the guides are tight (as are usually the condition if the car has not been seriously oiverheated) then we proceed to do the rest of the cylinders.

It will solve the problem. It is possible that with a large amount of play in the guide to valve clearance, that the reseal will only last for 20-30k miles. Most cases it will last much longer even with guides at the wear limit.

Everybody always wants a valve job. I wonder if this is due to many shops with little experience or maybe they are just interested in the for sure fix and a weeks worth of labor. After all they will put in new seals so they are sure to fix the problem if they don't cause any new ones with major surgery.

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UPDATE - 560SEL Oil Pressure - SUCCESS!! moedip Tech Help 5 10-06-2008 06:48 PM
Oil Change DIY Instructions Limited Edition Off-Topic Discussion 5 09-23-2007 10:56 AM
oil consumption specs. per MB service manual rickjordan Diesel Discussion 19 04-13-2004 04:57 PM
oil consumption Rebe Tech Help 8 08-10-2003 05:18 PM
Any fanatics religiously change oil @ 2.5K intervals or less? -fad Tech Help 60 03-19-2002 11:22 AM



All times are GMT -4. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page