|
quick thermostat question
Do I need to drain the coolant to replace a thermostat on an '85 300TD?
-Erik |
Its not necessary, but if you have not drained the coolant in a while, it might be a good idea while you're in there.
|
Thermostat Replacement
You will spill some coolant if you don't drain at least 1/2 gallon out first. You don't need to remove all of it, just get the level down below the stat. Be gentle with the plastic housing and remember that you will need a new o-ring seal.
|
| All times are GMT -4. The time now is 06:32 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website