|
|
|
#1
|
|||
|
|||
84 380 sl does not start..will it run with a bad ovp relay?
Hello My 380sl wont start. I ordered a new fuel pump relay and no difference. I pulled out the ovp relay and the fuse is good but when I shake it something is rattling inside. Will the 380sl run without the ovp in place or do I have to jump the pins? I have fuel going into the fuel distributor and coming back out to the a/c line for cooling. Thank You!
|
#2
|
|||
|
|||
i had that on my OVP relay ,red fuse was good ,insidethe solder joint was bad . re-soldered it was back to first time cold start
Ad |
#3
|
||||
|
||||
I believe it should start or at least sputter/try, but it will be very hard to keep it going until it warms up...depends a lot on the current mixture adjustment, if its on the lean side it probably won't run.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
Bookmarks |
|
|