Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-12-2002, 03:42 PM
Sfk35
Guest
 
Posts: n/a
1975, 240D Mercedes, Engine cycles up and down

Question: My 1975 Mercedes 240D Engine cycles up and down so that once I give it some gas while in gear the car goes fast, slow, fast uncontrolably no matter how hard you keep your foot steady. The engine also cycles like this if in neutral. The engine does idle OK though, although the car really super smokes exhaust until it warms up.
I blew the air line out that goes from the air intake manifold to the injection pump. This helped but still same problem.

History: Car ran great untill I blew an oil line going to the radiator cooler and oil blew all over inside of car engine (I did shut the car right down). I cleaned the entire engine. Some oil did get suck into the oil filled air filter. (Note: This air filter is designed to have about like 1" of oil in it, the rest is like a brillo pad where the air has to pass through it in order to get to the manifold).
I see the line going to the air injection pump has a venturi nozzle I made sure was cleaned out. This helped.
I have driven the car for about 1,000 miles but same problem persists. The car runs OK once you are going full throttle. However, semi buckles as you increase speed.
But again have to give it full throttle or let it idle.

I brought it to one guy who works on Mercedes. He just charge me to increase the idle rate. Didn't help.
NEED HELP!!
Question: Can I spray any sort of cleaning solution into the air line going into the injection pump. Is that the problem?

Reply With Quote
  #2  
Old 03-12-2002, 05:47 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
There is a vacuum diaphram on the rear of the injection pump that controls the fuel mixture on this engine. Sounds like the diaphram has a split in it.
The part number is 000-075-06-07 & takes about 1-1.5 hrs to install.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page