My passenger seat will not lower but other functions work ok any ideas?
Thanks

__________________
A.Velji
88 300E/Debadged and Monotoned
Euro light conversion
Clear corners
Performance muffler..(love itttttt!!)
White Gauges by Chris Henkel
alpine CD am/fm,Fosgate amp,Nakamichi sub ported in cabin,Fosgates separates.
http://members.rogers.com/seriousimportgroup/1.jpg
http://members.rogers.com/seriousimportgroup/2.jpg

Take the unit out and spray some WD-40 on the switches and the holes on it.

Worked like a charm on mine when my seat only moved forward.

do you hear the motor working?

__________________
2012 BMW X5 (Beef + Granite suspension model)

1995 E300D - The original humming machine (consumed by Flood 2017)
2000 E320 - The evolution (consumed by flood 2017)

hi Thanks for the replies.
Yes i hear clicks but no movement.
Visa which unit and switches ?are you referring to the Motor?
Thanks again

__________________
A.Velji
88 300E/Debadged and Monotoned
Euro light conversion
Clear corners
Performance muffler..(love itttttt!!)
White Gauges by Chris Henkel
alpine CD am/fm,Fosgate amp,Nakamichi sub ported in cabin,Fosgates separates.
http://members.rogers.com/seriousimportgroup/1.jpg
http://members.rogers.com/seriousimportgroup/2.jpg

If you can hear the motor run but the seat will not move then the drive cable has disengaged from the motor, its a pretty bad design as it does not employ a positive stop and the cable can move in and out of its sheath.

You can either shorten the sheath of the cable for a permanent repair - just resetting the cable works also. My car also faced that problem, I took the seat out and fixed it.

__________________
2012 BMW X5 (Beef + Granite suspension model)

1995 E300D - The original humming machine (consumed by Flood 2017)
2000 E320 - The evolution (consumed by flood 2017)

I meant the switches. Take the switch pod out of the car though.

EDIT - If you hear clicks then the problem is elsewhere. Mine didn't make any noise at all.