PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   230 SL 500 torque spec (http://www.peachparts.com/shopforum/tech-help/337145-230-sl-500-torque-spec.html)

1991 560 SEC 04-06-2013 04:22 AM
230 SL 500 torque spec
 
Anyone know the torque spec for the valve cover?

97 SL320 04-06-2013 09:08 AM
No, but we can figure out what it needs. Does this have a rubber o ring in a groove type gasket? The groove on this type is sized so once the cover contacts the head, maximum sealing is attained, any torque applied after that is just to keep the bolt from vibrating out.

Medium - firm tight with a screw driver is usually sufficient for 6 MM dia bolts ( usually 10 mm hex head )

1991 560 SEC 04-06-2013 01:36 PM
Got it from the dealer 9NM


All times are GMT -4. The time now is 11:13 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website